Ocedar Scrubber Head
Some links on this page are affiliate links. If you buy through them we may earn a commission, at no extra cost to you. It never changes which products we pick — see our affiliate disclaimer.
Every year, thousands of O-Cedar owners order an ocedar scrubber head only to find it won’t snap onto their mop base. The EasyWring 1-Tank and RinseClean 2-Tank systems are not interchangeable, and third-party listings often bury that detail until it’s too late. This mistake frequently costs people both time and a return trip to the hardware store.
Our top pick is the 2 Pack Spin Mop Replace Scrub Brush Head for O Cedar RinseClean 2-Tank because it directly addresses the fail point—attachment security—with an upgraded tight-fit base and dense stiff bristles that outperform generic heads on grout.
📌 This article contains affiliate links. As an Amazon Associate I earn from qualifying purchases, at no extra cost to you. Product prices and availability are accurate as of the date of publication. Full disclosure.
| Product | Best For | Buy Link |
|---|---|---|
| YZJAJZY 7-Pack Replacement Heads | Budget multi-pack | Check Price |
| Scrubber Mop Head for O-Cedar EasyWring 1-Tank | Everyday 1-tank scrubbing | Check Price |
| Small Spin Mop Base + Scrub Brush (RinseClean 2-Tank) | Complete base replacement | Check Price |
| 2-Pack Scrub Brush Head (RinseClean 2-Tank) | Secure tight fit | Check Price |
| Scrub Brush Head (EasyWring 1-Tank) | Heavy-duty 1-tank scrubbing | Check Price |
| Spin Mop Scrub Brush Head (RinseClean 2-Tank, Blue) | Corner reach | Check Price |
How We Narrowed Down These Ocedar Scrubber Heads
We judged every candidate against three non-negotiable criteria. First, exact compatibility with the O-Cedar tank system: EasyWring 1-Tank heads have a different base shape than RinseClean 2-Tank heads, and a wrong fit means a head that spins uselessly or falls off. Second, bristle material and stiffness: microfiber catches dust and hair, while stiff nylon or polypropylene bristles dig into grout but can scratch soft hardwood if used carelessly. Third, attachment security: a head that pops off mid-mop or needs wrestling to snap on is worthless. The listings above provided the specs we needed—bristle type, tank system compatibility, and any mention of tight-fit upgrades. Before ordering, check the sticker on your O-Cedar bucket to confirm whether you have 1-Tank or 2-Tank model; that single step eliminates most returns.
Scrubber Mop Head for O-Cedar EasyWring 1-Tank (Everyday 1-Tank Scrubber)
Small Spin Mop Base + Scrub Brush (RinseClean 2-Tank Complete Replacement)
YZJAJZY 7-Pack Replacement Heads (Best Budget Multi-Pack)
Quick take: If you burn through mop heads or have multiple O-Cedar mops, this 7-pack delivers the lowest cost per head and throws in a scrubber upgrade for tougher spots.
The listing describes these as microfiber mop replace heads that are machine washable and reusable. The material choice matters: microfiber grabs dust and hair without scratching sealed hardwood, which is exactly what you want for daily maintenance. But the ‘Upgraded Version Scrubber Brushes’ with dense stiff bristles and a center scrub brush adds a second cleaning mode that standard microfiber pads lack.
Compatibility is the weak spot here. The listing says ‘designed specifically for the Oced’ without naming EasyWring or RinseClean, so I’d treat this as a generic spin mop head that may fit several older O-Cedar models but likely no current tank-specific base. That’s a real annoyance: you might get a head that spins but doesn’t lock, which defeats the purpose.
Pros:
- 7-pack value — lowers replacement cost per head compared to buying singles.
- Microfiber + scrubber combo — one head handles both dusting and stuck-on grime.
- Machine washable — reusable, though air dry only to preserve the plastic center hub.
- Center scrub brush — targets stains without switching heads.
Cons:
- Unclear tank compatibility — no mention of EasyWring or RinseClean, so fit is a gamble.
- Plastic base may warp — listing doesn’t specify heat resistance; high dryer heat could distort the attachment point.
The Real Deal
Best for: Budget-conscious owners with older O-Cedar spin mops who want a stash of replacements. Skip if: You own a current EasyWring 1-Tank or RinseClean 2-Tank and need a guaranteed exact fit.
Scrubber Mop Head for O-Cedar EasyWring 1-Tank (Everyday 1-Tank Scrubber)
Why it made our list: For EasyWring 1-Tank owners, this is a straightforward swap-in that replaces your worn scrubber with premium nylon bristles. As an ocedar scrubber head replacement, it’s a no-brainer if you already own the EasyWring.
The head uses premium nylon bristles, which the listing states are resistant to wear and chemicals. Nylon is a smart pick for a scrub brush because it holds stiffness longer than polyester and doesn’t absorb water, so it dries faster and resists mold. The material spec tells me this will keep its shape after dozens of wringing cycles.
It’s listed as ‘various surfaces use’ including shower cleaning, which means the bristles are soft enough for fiberglass but firm enough for tile. One annoyance: the listing doesn’t specify whether the base is twist-lock or slide-on, so if your EasyWring base is worn, this head might still pop off under heavy scrubbing.
Pros:
- Nylon bristles — resist bending and stay effective after multiple washes.
- EasyWring 1-Tank specific — no guessing on fit for that system.
- Safe for multiple hard surfaces — bathroom tile, sealed wood, vinyl.
- Replaces worn scrub strip — restores grout-cleaning power.
Cons:
- Single pack only — no bulk discount if you need replacements often.
- No base included — you must have a working EasyWring mop base already.
Our Take
Perfect for: EasyWring 1-Tank users who want a dedicated scrubber head for weekly deep cleans. Not great if: You need a complete base replacement or own a RinseClean 2-Tank.
Small Spin Mop Base + Scrub Brush (RinseClean 2-Tank Complete Replacement)
In a nutshell: This is the only option in our list that combines a replacement mop base with a scrub brush, solving both a broken base and a worn head at once.
The listing emphasizes dense stiff bristles on the outer edges and a separate inner scrubber, which means you get a two-zone cleaning surface: soft outer bristles for general dirt, stiffer center for stains. The base is triangular, matching the RinseClean 2-Tank’s unusual shape, so it’s not interchangeable with any other system.
Assembly is described as ‘snap together, very solid,’ which suggests a friction fit rather than a twist-lock. That’s fine for a brand-new base, but after repeated use, friction fits can loosen faster than mechanical locks. Another honest annoyance: this is a single unit, so if the base breaks again, you’re buying the whole set again instead of just a head.
Pros:
- Includes triangular mop base — restores a damaged RinseClean 2-Tank mop to working condition.
- Outer stiff bristles + inner scrubber — handles edge grout and flat tile in one pass.
- Easy snap assembly — no tools required.
- RinseClean 2-Tank specific — exact shape match.
Cons:
- Friction fit may wear — no twist-lock means potential pop-off after months of scrubbing.
- Higher upfront cost — you pay for both base and head even if you only need one.
Why It Stands Out
Great match for: Someone whose RinseClean base cracked or warped and also needs a fresh scrubber. Think twice if: Your base is still fine and you just want cheaper head replacements.
2-Pack Scrub Brush Head for O Cedar RinseClean 2-Tank (Secure Tight Fit)
Quick take: This two-pack wins our top recommendation because it directly targets the biggest third-party failure point: heads that pop off mid-mop.
The listing claims ‘upgraded to stay attached the mop base tightly,’ which is the specification I care about most. A scrub head is useless if it detaches when you hit a grout line. The dense stiff bristles also mean it will dig into crevices far better than a microfiber pad, and the two-pack keeps a spare ready for rotation while one dries.
It’s only compatible with the RinseClean 2-Tank system, so EasyWring owners must look elsewhere. That exclusivity is actually a plus: the triangular cutouts and locking tabs are shaped for that tank’s base, reducing the chance of a loose universal fit. One minor annoyance: the listing doesn’t mention whether the bristles are nylon or polypropylene, which affects how they handle bleach-based cleaners.
Pros:
- Tight-fit upgrade — specifically redesigned to stay on the 2-Tank base during aggressive scrubbing.
- Dense stiff bristles — cut through scuff marks and grout haze without multiple passes.
- Two-pack — rotate heads to extend life and avoid mold between washes.
- Exact RinseClean 2-Tank compatibility — no triangular plate guesswork.
Cons:
- No base included — requires intact 2-Tank base.
- Bristle material unspecified — may degrade faster with harsh chemicals than nylon.
The Final Word
Ideal for: RinseClean 2-Tank owners who want a reliable scrub head that stays put. Pass on this if: You have an EasyWring 1-Tank or need a full base replacement.
Scrub Brush Head for O-Cedar EasyWring 1-Tank (Heavy-Duty Bristle Density)
Here’s the deal: If your EasyWring 1-Tank scrubber has gone bald, this head restores serious scrubbing power with a denser bristle pattern.
The ‘New Design’ boasts more bristles that are firm, which on paper translates to better coverage per swipe and less pressure needed to lift dried mud. That matters if you care about the floor itself, because you don’t want to grind grit into a sealed wood surface; denser bristles let you use lighter strokes.
The listing says ‘ONLY for 1-Tank,’ so it’s a safe bet for EasyWring owners but useless for RinseClean. Suitable for almost any hard floor surface, though I’d avoid unsealed stone because stiff bristles can scratch. One honest annoyance: it’s sold as a single head, so if you clean two floors a week, you’ll be replacing this more often than a multi-pack.
Pros:
- Denser bristle count — faster stain removal with fewer passes.
- EasyWring 1-Tank exclusive — shape matches that base exactly.
- Shower-friendly — safe for tile, fiberglass, and sealed vinyl.
- Firm but not brittle — bends under pressure without snapping off at the base.
Cons:
- Single pack — no spare while washing; downtime between cleans.
- No twist-lock mention — if your EasyWring base has worn tabs, this may still wiggle.
Who Should Buy This
Perfect for: EasyWring 1-Tank users who need maximum scrubbing power on grout and textured tile. Not great if: You want a multi-pack or have a RinseClean system.
Spin Mop Scrub Brush Head for O Cedar RinseClean 2-Tank (Blue, Corner-Reaching)
What stood out: This blue scrubber head mentions a unique three-row bristle layout and efficient corner cleaning, which matters if you battle baseboards and tight corners.
The listing states three rows of high-quality bristles and a unique design. Three rows is important because most scrub heads have two concentric rings; a third row fills the center gap that often leaves streaks. The blue color is just aesthetic, but it helps you identify the scrub head at a glance versus your microfiber pad.
Compatible only with the RinseClean 2-Tank system, and the listing claims durable construction. However, it doesn’t mention a tight-fit upgrade like product #4, so attachment security is less certain. One practical annoyance: the corners of a triangular base can still miss the very tip where floor meets wall, so ‘efficient corner cleaning’ may be marketing rather than a shape advantage.
Pros:
- Three-row bristle pattern — covers the full surface area without dead spots.
- RinseClean 2-Tank specific — correct triangular shape.
- Blue color coding — quick visual ID among multiple heads.
- Durable construction claims — suggests long-term use if cared for properly.
Cons:
- No tight-fit guarantee — may pop off under heavy side pressure unless base is new.
- Single pack — no spare, and blue color doesn’t add performance.
Final Thoughts
Great match for: RinseClean 2-Tank users who want a visually distinct scrubber and coverage from three bristle rows. Think twice if: You need the most secure attachment; product #4 has a documented tight-fit upgrade.
How to Choose the Right Scrubber Head for Your O-Cedar Spin Mop
Before ordering any o cedar mop brush head, check the sticker on your bucket. The EasyWring 1-Tank and RinseClean 2-Tank systems use different base shapes, and no amount of forcing will make the wrong head fit. This buying guide breaks down the three factors that matter most.
1. Confirm Your Tank System: EasyWring vs. RinseClean
The EasyWring 1-Tank has a rectangular or round base with a single tank for water and wringing. The RinseClean 2-Tank system has a triangular base and two separate tanks—one for clean water, one for dirty rinse water. A scrubber head labeled ‘1-Tank’ will not lock onto a 2-Tank base, and vice versa. Products #2 and #5 are specifically for EasyWring; products #3, #4, and #6 are for RinseClean 2-Tank. Product #1 is vague, so avoid it unless you know your mop is an older universal model.
2. Bristle Material: Stiff Scrub vs. Microfiber
Microfiber heads like the YZJAJZY 7-pack are best for daily dust and light spills. Stiff nylon or polypropylene bristles—found on every other product here—are designed for grout, scuff marks, and dried mud. If you’re specifically dealing with tile grout and want a handheld tool instead, our extendable tile scrubber article covers standalone options that may suit better than a mop head. Never use stiff bristles on unsealed stone or soft hardwood; they will scratch.
3. Attachment Mechanism: Twist-Lock vs. Snap-On
Some O-Cedar bases use a twist-lock collar that threads the head on; others use a simple snap-on friction fit. The listing for product #4 explicitly mentions a tight-fit upgrade, which is why it won our top pick. Product #3’s snap-together assembly is convenient but will loosen over time. If your current head pops off frequently, the base tabs may be worn, not the head—so check both before buying a replacement.
4. Care and Washing: Heat Warps Plastic
All these heads are machine washable, but the plastic center hub will warp in a hot dryer. Air dry only, bristle side up. Washing also shortens the life of stiff bristles: expect to replace a scrub head every 2-4 months with weekly use, compared to 6-12 months for a microfiber head used for light dusting only. For outdoor or grill-related scrubbing, a dedicated smarter scrubber grill brush is a better tool than any mop head.
Our Final Recommendation
The 2-Pack Scrub Brush Head for RinseClean 2-Tank is our overall winner for its tight-fit design and dense bristles. For budget buyers, the YZJAJZY 7-Pack offers the lowest cost per head, though compatibility is uncertain. EasyWring 1-Tank owners should grab the Scrub Brush Head for O-Cedar EasyWring 1-Tank (product #5) for its denser bristle count. In every case, match the head to your tank system and air dry to keep the plastic base intact.
Frequently Asked Questions
What’s the difference between a spin mop scrub brush and a regular microfiber head?
A spin mop scrub brush uses stiff bristles—usually nylon or polypropylene—to dig into grout, dried mud, and scuff marks. Microfiber heads trap dust and hair but don’t scrub. Use microfiber for daily maintenance and a scrub head for weekly deep cleans or stain removal. Mixing them up leads to streaks or scratched floors.
Can I use an o cedar mop brush head on any O-Cedar spin mop?
No. Heads are specific to either the EasyWring 1-Tank or RinseClean 2-Tank system. The base shapes are different, so a head for one will not lock onto the other. Check your bucket’s label before ordering. Some generic heads claim universal fit, but they usually wobble or fall off during use.
How do I attach a scrubber head to my O-Cedar mop without it spinning off?
Make sure the base tabs are not worn or bent. Align the head’s locking notches with the base, then press or twist until you hear a firm click. If the head still spins, the base is likely the problem, not the head. If you find yourself scrubbing on hands and knees often, an electric scrubber might be worth considering over manual mop heads.
How often should I replace my O-Cedar scrubber heads?
With weekly scrubbing, stiff-bristle heads last 2-4 months before bristles flatten and lose cleaning power. Microfiber heads used for light dusting can last 6-12 months. If you notice the head leaving streaks or taking more passes to clean, it’s time for a replacement.
Can I put these scrubber heads in the washing machine without ruining the bristles?
Yes, machine wash on cold with mild detergent. Do not use fabric softener—it coats bristles and reduces scrubbing power. Never put them in the dryer; high heat warps the plastic base and can melt synthetic bristles. Air dry bristle side up, away from direct sunlight.
